Evaporators

Product Details:

Evaporators are used to remove solvent from the food products in form of vapor. For most evaporation systems, the solvent is water and heat are provided by steam condensation.Main factors in consideration during evaporator design are 1. Heat Transfer.2. Liquid-vapor separation. 3. Energy consumption efficiency.
The heat transfer units are called calandria(single tube heat exchanger). The liquid-vapor separation units are called flash chambers or separation tanks. Flash chamber and calandria are combined together form the body of the evaporator.

With our expertise in this domain, we are able to offer a superior quality range of MECHANICAL VAPOUR RECOMPRESSION EVAPORATOR ( MVR). These mechanical vapor recompressions are widely used for the purpose of raising temperature and pressure of vapors. Firstly, the vapor is taken out of evaporators and compressed then sent back to the evaporator once more, by the means of mechanical compression. In this process, the pressure is increased by use of mechanical energy.These plants are the latest technology-oriented and available for different scale production requirements. Our products are added with international quality values and on time delivery commitments.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Evaporators are used to remove solvent from the food products in form of vapor. For most evaporation systems, the solvent is water and heat are provided by steam condensation.Main factors in consideration during evaporator design are 1. Heat Transfer.2. Liquid-vapor separation. 3. Energy consumption efficiency.The heat transfer units are called calandria(single tube heat exchanger). The liquid-vapor separation units are called flash chambers or separation tanks.Flash chamber and calandria are combined together form the body of the evaporator.

Thin Film Evaporators are useful for concentration, distillation, and stripping of viscous liquids.It consists of two major parts:L
1. A heated body.
2. Close clearance rotor.
3.Distribution ring.
We are offering an exquisite range of AGITATEDTHIN FILM EVAPORATORS. These plants are latest technology-oriented and available for different scale production requirements. Our products are added with international quality values and on time delivery commitments.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Evaporators are used to remove solvent from the food products in form of vapor. For most evaporation systems, the solvent is water and heat are provided by steam condensation.

Main factors in consideration during evaporator design are:

1. Heat Transfer.

2. Liquid vapour separation.

3. Energy consumption efficiency.

The heat transfer units are called calandria(single tube heat exchanger). The liquid-vapor separation units are called flash chambers or separation tanks. Flash chamber and calandria are combined together form the body of the evaporator.

Backed by the profound experience of the industry, we are offering a range of BATCH TYPE EVAPORATORS. The offered evaporators belong to the category of wiped film evaporator. Our evaporators are ideal for liquid that is highly viscous and to strip down solvents to a very low level. Moreover, a huge amount of heat is needed in order to reach an acceptable evaporation rate. Some of the applications of our offered evaporators are:

 

Application areas:

• Mango pulp paste
• Herbal extract
• Sugar Syrup
• Malt mix slurry
• Tomato paste
• Starch

 

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Being a client oriented firm, we are able to offer our customers a wide range of Falling Film Evaporators. These evaporators are very popular among the customers for their liquid distribution method done by distributor plates. The offered evaporators are also used for concentration of milk, malt and fruit juice. Our evaporators are widely appreciated for their features 

 

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Evaporators are used to remove solvent from the food products in form of vapor. For most evaporation systems, the solvent is water and heat are provided by steam condensation.

Main factors in consideration during evaporator design are:
1. Heat Transfer.
2. Liquid vapour separation.
3. Energy consumption efficiency.

The heat transfer units are called calandria(single tube heat exchanger). The liquid-vapor separation units are called flash chambers or separation tanks. Flash chamber and calandria are combined together form the body of the evaporator.

RISING FILM EVAPORATOR has the advantage of efficient liquid distribution of the rising film unit coupled with lower headroom requirements.

Our organization is counted among the leading firms offering a wide range of RISING FILM EVAPORATOR in both single effect and multi-effect variants.Sourced from trusted vendors, these work with boiling liquid inside the tubes. During the process, heating is done usually by steam and rising film evaporator is best suited for liquids that are non-clear and salting. These are specially designed by the manufacturers at least 4 m for providing stiffness. Clients can avail these evaporators from us at market-leading prices.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Evaporators are used to remove solvent from the food products in form of vapor. For most evaporation systems, the solvent is water and heat are provided by steam condensation.

Main factors in consideration during evaporator design are:

1. Heat Transfer.

2. Liquid vapour separation.

3. Energy consumption efficiency.

The heat transfer units are called calandria(single tube heat exchanger). The liquid-vapor separation units are called flash chambers or separation tanks. Flash chamber and calandria are combined together form the body of the evaporator.

With the help of our sourcing agents, we are able to offer our customers a wide array of WIPED FILM EVAPORATORS. It is used mainly for herbal extraction plants. The evaporators offered by us are typically used for liquid that strips down solvents to a very low level. Level of concentration in case of viscous liquid can be reached to 75 to 80% TS. These evaporators are widely used to flash distill heat sensitive material, which having components under the controlled temperature at atmospheric pressure.These plants are latest technology-oriented and available for different scale production requirements. Our products are added with international quality values and on time delivery commitments.

 

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Evaporators are used to remove solvent from the food products in form of vapor. For most evaporation systems, the solvent is water and heat are provided by steam condensation.Main factors in consideration during evaporator design are 1. Heat Transfer.2. Liquid-vapor separation. 3. Energy consumption efficiency.The heat transfer units are called calandria(single tube heat exchanger). The liquid-vapor separation units are called flash chambers or separation tanks. Flash chamber and calandria are combined together form the body of the evaporator.
Our expertise in this domain has enabled us to offer Scrapped Surface Evaporators. These evaporators are ideal for products having viscous in the form of a paste or in syrup form which basically has tendency of scaling the process of evaporation. The offered evaporators are equipped with rotating blades which assures no quantity of the product is able to stay on the surface of heat transfer more than necessary. Moreover, our offered scrapped surface evaporators prevent thermal degradation.These plants are latest technology-oriented and available for different scale production requirements. Our products are added with international quality values and on time delivery commitments.

 

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Evaporators are used to remove solvent from the food products in form of vapor. For most evaporation systems, the solvent is water and heat are provided by steam condensation.

Main factors in consideration during evaporator design are:
1. Heat Transfer.
2. Liquid vapour separation.
3. Energy consumption efficiency.

The heat transfer units are called calandria(single tube heat exchanger). The liquid-vapor separation units are called flash chambers or separation tanks.
Flash chamber and calandria are combined together form the body of the evaporator.

The heating process in Forced Recirculation Evaporator is done by the recirculated heating of the product in calandria.

We are offering an exquisite range of FORCED RECIRCULATION EVAPORATORS as both single effect and multi-effect varients. These plants are latest technology-oriented and available for different scale production requirements. Our products are added with international quality values and on time delivery commitments.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

In order to fulfill the ever-changing demands of our clients, we are offering a quality range of Multiple Effect Evaporators (MEE). These evaporators make use of heat obtained from steam in order to evaporate water.

Under these evaporator plants, water is first boiled in a series of containers. Then each container will have low pressure than the previous one because the boiling temperature of water comes down with a decrease in pressure. There are only four stages involved that include more than four series of containers.

 

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)